Measure actual slab dimensions
Enter length and width in feet, but thickness in inches. Measure each rectangle separately for irregular layouts.
Enter slab dimensions and waste to estimate cubic yards, approximate 80-pound bags and material-only cost.
Estimate concrete cubic yards, cubic feet, number of 80 lb bags and ready-mix material cost. Free US concrete slab calculator.
Review and verify the output before sharing or using it.
Estimates exclude delivery, labour, reinforcement and site preparation.
Instructions for this specific utility, not generic steps.
Enter length and width in feet, but thickness in inches. Measure each rectangle separately for irregular layouts.
Set a realistic waste allowance; the estimate will include extra volume. The price input is dollars per cubic yard, not per bag.
Compare cubic feet, cubic yards, bag equivalents and material-only cost before ordering. Rebar, reinforcement, pumps and delivery are not included.
For a 10 ft × 12 ft slab that is 4 inches thick, the geometric volume is 40 ft³, or about 1.48 yd³. A hypothetical 10% allowance brings the order estimate to about 1.63 yd³. Check the supplier’s minimum delivery and rounding policy.
Do not treat this calculator as a structural thickness recommendation. Slab type, climate, loading, site preparation, sub-base and local codes may require professional advice.
Multiply slab length by width and thickness, ensuring consistent units. This calculator converts inch thickness to feet and cubic feet to cubic yards.
This tool assumes approximately 0.6 cubic feet of cured mix per 80 lb bag. Actual packaged product yields vary by manufacturer.
No. Price is a user-entered material rate per cubic yard. Delivery minimums, equipment, labour, subbase and reinforcement are excluded.
A simple rectangle is straightforward, but real driveways and patios can include recesses, thickened edges or different depths. Do not flatten those details into an average dimension without understanding what you might leave out. Measure the actual geometry first and use the calculator for each rectangular section.
Consider a 10 ft × 8 ft area at 4 inches thick: the geometric volume is about 0.99 cubic yard. A second 6 ft × 5 ft section at the same depth adds about 0.37 cubic yard. Together they total roughly 1.36 cubic yards before allowances. At a hypothetical 10% waste factor, the estimate is about 1.49 cubic yards.
That is an arithmetic example, not a recommended order quantity. Round only after you understand the supplier's batching, delivery minimums and site constraints.
This tool estimates material volume and approximate material cost, not engineering requirements. It cannot determine suitable slab thickness, reinforcement or site preparation for your structure. Check local code and professional plans where required. You can also use the roof pitch calculator for geometric roof measurements, or see the main contractor tools section.
Explore related ALINOVA utilities without leaving this domain.